Omnia SDR

Omnia SDR Proficio


The Omnia SDR Proficio is the next generation of Omnia SDR Transceivers. It is an all band version (160M - 10M) of the Omnia SDR Basic It has all the features of the current Omnia SDR Basic:
•96kHz digital I/Q interface. No additional sound card needed.
•Two tone, 2 kHz spacing, third-order dynamic range: 99 dB.
•Support for Elecraft T1 automatic antenna tuner.
•External Amplifier control via AMP port.
•CW Key Jack.
•DG8SAQ/PE0FKO/SoftRock control interface.
•Open Source firmware.
•Firmware Field Updates via on board USB bootloader.

With these additional features:

• All band.  The Proficio covers all bands from 160M to 10M.
• Enhanced receive.  A RF amplifier is now in the RF front end that provides about 19db of gain at 10M and tapers down to about 0db at 160M
• Receive Band Pass Filters for all band groupings (160M,80M,40M-60M,20M-30M,15M-17M,12M-10M)
• The same BPFs are used in conjunction with Low Pass Filters in the transmit path to provide a clean output.
• 5W Class A PA.  Clean output of 5W on all bands (slightly less on 160M and 10M).
• Real CW. Real internally (via firmware) generated CW. No latency issues as with other SDR transceivers. Iambic code generation and semi break-in modes are supported.

The Proficio is compatible with all host SDR applications that work with the Basic. The Proficio is supplied as a kit with all SMD devices installed.  The customer needs to install the thru hole components and four easy to wind inductors.

Continuous from 1.8MHz to 30MHz. (Lower sensitivity below 1.8MHz and between amateur bands)
Sensitivity: MDS: Average -123db. (-125db on 10M. -121db on 160M) ( MDS performance specifications for amateur bands only.)
Power Output: 5W, 4W minimum (transmit permitted on amateur bands only)
Spurious Emissions: Meets or exceeds FCC requirements (-43db from carrier).

Technical support and documentation is located at: Support.
Please do not use this website to obtain technical support. Requests for technical support via this website will not receive a response.

Enclosure not included.

These kits are produced at time of order. There is a two day lead time before shipping the kit.

Sold Out
  • Model: V1

This product was added to our catalog on Thursday 07 July, 2016.

Your IP Address is:
Copyright © 2017 Omnia SDR, LLC. Powered by Zen Cart